LNK306PN dip-7

Микросхема LNK306PN

LNK306PN - AC/DC Converter 225mA MDCM CCM, DIP-7

 

Cost Effective Linear/Cap Dropper Replacement

• Lowest cost and component count buck converter solution
• Fully integrated auto-restart for short-circuit and open loop fault protection - saves external component costs
• 66 kHz operation with accurate current limit - allows low cost off-the-shelf 1 mH inductor for up to 120 mA output current
• Tight tolerances and negligible temperature variation
• High breakdown voltage of 700 V provides excellent input surge withstand
• Frequency jittering dramatically reduces EMI (~10 dB) - minimizes EMI filter cost
• High thermal shutdown temperature (+135 °C minimum)

 

Much Higher Performance over Discrete Buck and Passive Solutions

• Supports buck, buck-boost and flyback topologies
• System level thermal overload, output short-circuit and open control loop protection
• Excellent line and load regulation even with typical configuration
• High bandwidth provides fast turn-on with no overshoot
• Current limit operation rejects line ripple
• Universal input voltage range (85 VAC to 265 VAC)
• Built-in current limit and hysteretic thermal protection
• Higher efficiency than passive solutions
• Higher power factor than capacitor-fed solutions
• Entirely manufacturable in SMD

 

EcoSmart® – Extremely Energy Efficient

• Consumes typically only 50/80 mW in self-powered buck topology at 115/230 VAC input with no load (opto feedback)
• Consumes typically only 7/12 mW in flyback topology with external bias at 115/230 VAC input with no load
• Meets Blue Angel, Energy Star, and EU requirements

 

Применение

• Appliances and timers
• LED drivers and industrial controls