PM25LV010

Микросхема PM25LV010-AE

PM25LV010 - Serial Flash Memory With 33 MHz SPI Bus Interface, SOP-8

 

Особенности, параметры, характеристики:

Single Power Supply Operation

• Low voltage range: 2.7 V 3.6 V

 

Memory Organization

• Pm25LV512A: 64K x 8 (512 Kbit)
• Pm25LV010A: 128K x 8 (1 Mbit)
• Pm25LV020: 256K x 8 (2 Mbit)
• Pm25LV040: 512K x 8 (4 Mbit)
• Cost Effective Sector/Block Architecture
• 512Kb : Uniform 4Kbyte sectors / Two uniform 32Kbyte blocks
• 1Mb : Uniform 4Kbyte sectors / Four uniform 32Kbyte blocks
• 2Mb : Uniform 4Kbyte sectors / Four uniform 64Kbyte blocks
• 4Mb : Uniform 4Kbyte sectors / Eight uniform 64Kbyte blocks
• Bottom sector is configurable as one 4Kbyte sector or four 1Kbyte sectors (except Pm25LV512A)

 

Serial Peripheral Interface (SPI) Compatible

• Supports SPI Modes 0 (0,0) and 3 (1,1)
• Maximum 33 MHz clock rate for normal read
• Maximum 100 MHz clock rate for fast read

 

Page Program (up to 256 Bytes) Operation

• Typical 2 ms per page program

 

Sector, Block or Chip Erase Operation

• Typical 60 ms sector, block or chip erase

 

Software Write Protection

• The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only
• Hardware Write Protection
• Protect and unprotect the device from write operation by Write Protect (WP#) Pin
• Low Power Consumption
• Typical 10 mA active read current
• Typical 15 mA program/erase current

 

High Product Endurance

• Guarantee 200,000 program/erase cycles per single sector
• Minimum 20 years data retention

 

Industrial Standard Pin-out and Package

• 8-pin 150mil SOIC
• 8-pin 208mil SOIC for Pm25LV040
• 8-pin 300mil PDIP for Pm25LV040
• 8-contact WSON
• 8-pin TSSOP for Pm25LV512A

 

Datasheet PM25LV010 PDF