MX25L12835F

Микросхема MX25L12835F (MX25L12835FM2I-10G)

MX25L12835F - FLASH MEMORY, 128M-BIT [x 1/x 2/x 4]CMOS, MXSMIO® (SERIAL MULTI I/O), 3V, SOP-8

 

Особенности, параметры, характеристики

• Supports Serial Peripheral Interface -- Mode 0 and Mode 3
• Single Power Supply Operation
•  - 2.7 to 3.6 volt for read, erase, and program operations
• 128Mb: 134,217,728 x 1 bit structure or 67,108,864 x 2 bits (two I/O mode) structure or 33,554,432 x 4 bits (four I/O mode) structure
• Protocol Support
•  - Single I/O, Dual I/O and Quad I/O
• Latch-up protected to 100mA from -1V to Vcc +1V
• Fast read for SPI mode
• - Support clock frequency up to 133MHz for all protocols
• - Support Fast Read, 2READ, DREAD, 4READ, QREAD instructions.
• - Configurable dummy cycle number for fast read operation
• Quad Peripheral Interface (QPI) available
• Equal Sectors with 4K byte each, or Equal Blocks with 32K byte each or Equal Blocks with 64K byte each
• - Any Block can be erased individually
• Programming :
• - 256byte page buffer
• - Quad Input/Output page program(4PP) to enhance program performance
• Typical 100,000 erase/program cycles
• 20 years data retention
• Input Data Format
•  - 1-byte Command code
• Advanced Security Features
• - Block lock protection
• The BP0-BP3 and T/B status bit defines the size of the area to be protection against program and erase instructions
• - Advanced sector protection function (Solid and Password Protect)
• Additional 4K bit security OTP
•  - Features unique identifier
•  - factory locked identifiable, and customer lockable
• Command Reset
• Program/Erase Suspend and Resume operation
• Electronic Identification
•  - JEDEC 1-byte manufacturer ID and 2-byte device ID
• - RES command for 1-byte Device ID
• - REMS command for 1-byte manufacturer ID and 1-byte device ID
• Support Serial Flash Discoverable Parameters (SFDP) mode